Advance Paris presents its new X-A600 stereo power amplifier.
Its linear power supply is based on a 700VA toroidal transformer and a set of 6 capacitors for a total of 60000 µF. Combined with very high current power transistors to ensure dynamic sound even under heavy loads.
The X-A600 delivers 200 watts per channel in class AB into 8 ohms. A "High Bias" switch located on the rear of the unit allows the X-A600 to deliver the first watts in Class A. Beyond this power, switching to Class AB is done automatically. The X-A600 has a very rigid chassis due to its mechanical design. Each circuit is separated from the others by a compartmentalized construction that ensures effective shielding.
The independent power amplifier is an indispensable part of any advanced audio system. In combination with the X-P700 preamplifier you can build a high-quality audiophile system that can delicately drive all speakers under absolute control over the woofers. Equipped with RCA and XLR connectors, the A-X600 can be used in hi-fi or home theater. For greater discretion during your session, you have the option of turning off the VU meters.
Characteristics:
- Output power at 8 Ohms: 2 x 200 W RMS
- Output power at 4 Ohms: 2 x 300 W RMS
- Frequency response: 10Hz to 80kHz
- Distortion: Less than 0.05%
- Signal to noise ratio: Greater than 120dB
- Crosstalk: Greater than 90dB
- Standby consumption: Less than 0.5W
- Maximum consumption: 500W
- Transformer power: 700VA
- Transformer type: Toroidal
- Inputs: 1 x stereo RCA and 1 x balanced stereo XLR
- VU meter settings - Yes (On/Off / Low / Medium / High)
- Trigger jacks: 2 (IN / OUT) 12V
- Measurements: (Length x Height x Width in cm): 43 x 19.5 x 42.4
- Weight: 19 kilos
