Dali Rubicon 6 C + Sound Hub

DALI Sound Hub

599 €

7.597 €

VAT included

Guaranteed minimum price

Get register and you will earn 7596 points/76 €

(Each 1 € spent = 1 point, 1 point = 0 € discount)
Your cart will total 7596 points that can be converted into a voucher of 76 €.

Pack content

DALI Rubicon 6 C
DALI Sound Hub

Active Speakers

The RUBICON 6C is the best active speaker system in its class, the result of powerful drivers capable of moving massive amounts of air even in the lowest bass area. This stand speaker has an extremely stable wireless connection thanks to its proprietary network.

With two 250-watt Class D amplifiers per speaker, they are so powerful that they guarantee the necessary acoustic pressure even in complex musical passages or the most brutal cinematic explosions. Focused on zero loss, no latency and easy setup, the wireless connection only requires power to operate at full performance, meaning easy setup change and no installation of audio cables required.

The wireless connection between RUBICON C and the HUB will work even without an active WiFi signal as it is a specific connection between both devices. With a 100% SMC magnet, surrounded by a split copper bushing and attached to a large ferrite magnet, the SMC effect is focused and enhanced, reducing distortion to levels never seen before. The hybrid tweeter is patented by DALI for the RUBICON series built in Denmark. The hybrid tweeter module combines the dome tweeter with the ribbon tweeter for impressive reproduction of high frequencies.

Characteristics:

Wireless inputs: Full 24 Bit / 96 kHz (No bit-loss attenuated).
Hybrid tweeter system and two 6.5" woofers.
Frequency response: 37 - 30,000 Hz.
Sound pressure: 110 dB.
Internal amplification: 250W in class D.
Magnetic shielding.
Dimensions: 200 x 990 x 380 mm (W, H, D).
Weight: 20.8kg.
They require power connection.

They require a Sound Hub module for €649 to operate; further.

Equi Wireless Transmitter for DALI compatible speakers, with modular design resistant to obsolescence

The Dali Sound Hub transmitter is designed to allow the wired connection of multiple devices, with both digital and analog audio output, and from this, send the signal wirelessly in high quality, with very low latency, so that it can be received by the different models of compatible self-powered Dali speakers such as the Rubicon 2C, Rubicon 6C, Oberon 1C, Oberon 7C and Oberon On Wall C, all of them equipped with internal receivers to avoid the tedious passage of cables to them and it is only necessary to connect them to any power outlet nearby. The Sound Hub transmits to Dali C speakers using a proprietary 30-bit wireless protocol. The audio transmission latency from the input to the speaker is typically less than 15 mS, and the synchronization between the speakers is precise and stable. The Sound Hub also allows apt-X low compression Bluetooth link with any device that can broadcast it and has an internal Google Chrmecast module to facilitate full control and sending of audio from any device via Wi-Fi. Available the option of incorporating a Bluesound BluOS module (not included) to maximize enjoyment with music platforms via MQA compatible streaming and with full control from our phone or table or multi-room functionality.

Characteristics:

Allows wireless link with any Dali C speaker.
Wireless signal latency less than 15 milliseconds.
Internal DAC with 24-bit/96KHz resolution.
Integrated Google Chromecast module.
Allows apt-X low compression Bluetooth link.
It has analog inputs (minijack and RCA) and digital inputs (2 x optical and 1 x coaxial).
USB Type A port for charging functions.
Two bays for BluOs module integration or any other future improvements.
Analog RCA preamp output.
Mono RCA output for subwoofer.
Front control button with display.
External power supply.
Remote control.
Measurements: 76 x 300 x 213 mm.
Weight: 1.6 kilos.
Black color.
BluOS module option for €499 more.