The Xpression is a state-of-the-art moving coil cartridge equipped with a standard cartridge holder. A true reference product, it represents a perfect combination of three very characteristic elements of Ortofon. Firstly, the use of selective laser welding (SLM) techniques, used for the first time in the A90 and SPU 90 Anniversary models. Secondly, the modification of the generation system initially used with the A90 and Windfeld models. And thirdly and lastly, the well-known design tradition of Ortofon.
From a "commercial" point of view, the Xpression bridges the gap between high-end capsules such as the A90 and Windfeld and those designed to be mounted in stand-alone cartridges. The result is a moving-coil pickup capsule that combines the convenience of a standard plug-in cartridge holder (which provides a simple and elegant method of directly connecting the signal generator and boom) through its one-piece body. Since the length of the capsule is identical to that of an SPU, the Xpression can be easily integrated into a wide selection of arms without the need to worry about applying any additional alignment.
The length of the Xpression is also identical to that of an SPU, making extra vertical support force adjustments (VTA) unnecessary. On the other hand, both the mass and complexity of the Xpression ensure a good fit with most SPU compatible arms, including the T-110 and T-210 models from Ortofon. On the other hand, the moderately low output signal value and electrical design of the Xpression make it suitable for combination with most commercially available phono preamplifiers and step-up transformers (including the Ortofon ST-80 SE).
Features:
- Reference Moving Coil (MC) capsule.
- Cartridge and cartridge holder integrated in one piece.
- Outer body made of stainless steel and thermoplastic elastomer.
- Output voltage of 0.3 mV at 1 kHz and 5 cm/s.
- Frequency response: 10 - 60,000 Hz (-3 dB cut-off points).
- Recommended Load Impedance: MC / >10 Ohm.
- Tracking Ability: 90 um (at 315 Hz).
- Dynamic Compliance: 11 um/mN.
- Recommended Support Force: 28.6 grams.
- Field Stabilising Element (FSE).
- For moderate and high mass readout arms with SME connection.
- Weight: 28 g.
