This VM95 series cartridge with 0.6-mil conical stylus is suitable for turntables with a half-inch mount.
The special cartridge coil design delivers a powerful 4.0 mV output level. It also offers excellent channel separation and low distortion for exceptional tonal quality.
The durable, low-resonance housing includes threaded inserts that allow the cartridge to be mounted to the head with just two screws, without the need for nuts. And because the entire VM95 series shares the same body, the stylus can be replaced with any of six interchangeable AT-VMN95 replacement styli.
Features:
- Frequency response: 20 - 20,000 Hz
- Channel separation: 18 dB (1 kHz)
- Vertical tracking angle: 23° Vertical tracking angle: 23° Vertical tracking force: 1.8
- Vertical tracking force: 1.8 to 2.2 g (2.0 g standard)
- Stylus Construction: Bonded round shaft
- Recommended Load Impedance: 47,000 O
- Coil impedance: 3.3 kO (1 kHz)
- DC resistance: 485 O
- Coil inductance: 550 mH (1 kHz)
- Output voltage: 4.0 mV (@ 1 kHz, 5 cm/sec)
- Output Channel Balance: 2.5 dB (1 kHz)
- Conical stylus shape.
- Aluminium tube: cantilever
- Static compliance: 17 x 10 - 6 cm / dyne
- Dynamic compliance: 6.5 x 10 - 6 cm / dyne (100 Hz)
- Mounting on 1/2" centres
- Cartridge weight: 6.1 g
- Dimensions: 17.2 x 18.9 x 28.3 (height x width x depth mm)
- Included accessories: Two 11 mm installation screws;
- Recommended load capacitance: 100-200 pF
- Stylus size 0.6 mil
- Type VM Stereo Double Magnet
- Cable used for coil T.P. Copper
