The Cadenza Mono is the proposal of the Cadenza range to the growing interest in monophonic recordings with microgroove discs existing just before the first stereophonic records came to light. For many vinyl collectors, the most careful of these recordings have a special sound character, as well as the character of authentic treasures that defines many of them (in the case of historical sound recordings, both studio and live, from such legendary classical music directors as Arturo Toscanini or Whilhelm Furtwängler) invites you to play them with equipment specifically designed for them.
This is the case of the Cadenza Mono, a capsule that mounts a Fine Line Nude stylus with a r/R 8/40 um radius tip on a cylindrical aluminum cantilever. For ease of assembly, the pins are connected in such a way that the same signal is obtained on both sets of existing pins. On the other hand, internally the Cadenza Mono uses the same structure as the Cadenza Red although with settings optimized for stereo sound reproduction, the result being a relaxed and homogeneous sound that will allow the restless and demanding music lover to rediscover their favorite monophonic recordings.
Characteristics:
- Very high performance monophonic moving coil (MC) capsule.
- Precision mounted iron and cobalt pole pieces.
- Output voltage of 0.45 mV at 1 kHz and 5 cm/s.
- Frequency response: 20 - 50,000 Hz (cutoff points at -3 dB).
- Recommended Load Impedance: MC / 50 - 500 Ohm.
- Tracking Ability: 70 um (at 315 Hz).
- Dynamic Compliance: 12 um/mN.
- Recommended Support Force: 2.5 grams.
- Body of entirely metal construction.
- For reading arms of moderate and high mass.
- Weight: 10.7g.
8 other products in the same category: